Wiz750SR-105 serial to Ethernet setting

Wiz750SR-105 setting

 

1. download "wizconfig-V1.0.0"

  https://www.wiznet.io/wp-content/uploads/wiznethome/S2E%20Module/WIZ107_108SR/Utility/WIZ107_108_config_tool.zip

 

2. Connects LAN cable between PC and module and power on

3. Run config tool

4. Check my PC ip config

  - Set module ip(PC IP + 5??)/subnet mask/gateway/DNS

  - By default, its module status is TCP server/UDP broadcast/5000 port

  - Press "Apply Settings" and cycling the power

 

5. Run Socket test tool and goes to Client

  - Input module ip address and port

  - Connect : you should see succedded message

6. Send uart message via module and you'll get message from socket test tool window

 

7. Trouble

  - I havn't succedded TCP client mode so far...maybe some config issue. Will update when I make it

  - I have no idea how to use password function...??

 

Wiznet module seems to be popular but its usages inforamtion is not good enough...